مجید اسحق نیموری

بیوگرافی :

مدارک علمی :

• دکتری: 1388-1392 
  مکانیک تبدیل انرژی - دانشگاه تربیت مدرس
• کارشناسی ارشد: 1386-1388
  مکانیک تبدیل انرژی - دانشگاه تربیت مدرس
• کارشناسی: 1382-1386
  مهندسی مکانیک حرارت و سیالات - دانشگاه صنعتی اصفهان

زمینه‌های تدریس :

• پدیده‏ های انتقال در محیط متخلخل
• بهینه ‏سازی جریان اگزرژی
• انرژی در ساختمان
• انتقال حرارت
• ترمودینامیک

Journal Papers:

1. M. E. Nimvari*, T. Persoons, M. J. Gibbons, Pore-scale simulation of two-phase flow in biporous media, Physics of Fluids, 2024.
2. M. E. Nimvari*, M. J. Gibbons, Multiphase flow simulation in hybrid porous structure, Journal of Physics: Conference Series, 2024.
3. H. Fatahian, M. E. Nimvari*, N. F. Jouybari, E. Fatahian, W. Zhang, Improving the flow uniformity in compact parallel flow heat exchangers manifold using porous distributers, Journal of Thermal Analysis and Calorimetry, 2022.
4. H. Fatahian*, E. Hosseini, M. E. Nimvari, R. Fatahian, N. F. Jouybari, E. Fatahian, Applicability assessment of using nanofiber porous deflector in Savonius wind turbine, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022.
5. Z. Poursharif, H. Salarian*, K. Javaherdeh, M. E. Nimvari, Heat transfer investigation of non-Newtonian fluid flow in an annular pipe embedded with porous discs: A turbulent study, Journal of Thermal Engineering, 2022.
6. N. Tonekaboni, H. Salarian*, M. E. Nimvari, J. Khaleghinia, Exergo-economic analysis of the solar CCHP with a collector embedded with partially porous material, International Journal of Exergy, 2022.
7. N. Tonekaboni, H. Salarian*, M. E. Nimvari, J. Khaleghinia, Energy and exergy analysis of an enhanced solar CCHP system with a collector embedded by porous media and nano-fluid, Journal of Thermal Engineering, 2021.
8. N. F. Jouybari*, M. E. Nimvari, W. Zhang, A comparative study of different heat transfer enhancement mechanisms in a partially porous pipe, SN Applied Sciences, 2021.
9. E. Hosseini*, H. Fatahian, G. Ahmadi, M. E. Nimvari, E. Fatahian, CFD study on the effect of gas temperature on the separation efficiency of square cyclones, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2021.
10. M. Yousefi Roshan, J. Khaleghinia*, M. E. Nimvari, H. Salarian, Performance improvement of Darrieus wind turbine using different cavity layouts, Energy Conversion and Management, 2021.
11. H. Fatahian, E. Fatahian, M. E. Nimvari*, G. Ahmadi, Novel design for square cyclone using rounded corner and double inverted cone shapes- a CFD approach, Powder Technology, 2021.
12. Z. Poursharif, H. Salarian*, K. Javaherdeh, M. E. Nimvari, Numerical simulation of heat transfer on nonofluid flow in an annular pipe with simultaneous embedding of partially porous media and triangular fins, Journal of the Chinese Institute of Engineers, 2021.
13. N. F. Jouybari, M. E. Nimvari*, S. Lundstrom, Z. Gholami, Heat transfer modification within porous layer of a partially filled pipe at high Reynolds number including dispersion effect, Journal of Porous Media, 2020.
14. M. Omranshobi, H. Salarian*, A. L. Nichkoohi, M. E. Nimvari, Experimental and numerical investigation of a modified designed baseboard radiator using an air gap enhancing free convection heat transfer, Journal of Building Engineering, 2020.
15. M. E. Nimvari*, H. Fatahian, E. Fatahian, Performance improvement of a Savonius vertical axis wind turbine using a porous deflector, Energy Conversion and Management, 2020.
16. Q. Esmaili*, M. E. Nimvari, N. F. Jouybari, Y. S. Chen, Model based water management diagnosis in polymer electrolyte membrane fuel cell, International Journal of Hydrogen Energy, 2020.
17. H. Fatahian, H. Salarian*, M. E. Nimvari, J. Khaleghinia, Computational fluid dynamics simulation of aerodynamic performance and flow separation by single element and slatted airfoils under rainfall conditions, Applied Mathematical Modeling, 2020.
18. H. Fatahian, H. Salarian*, M. E. Nimvari, J. Khaleghinia, Numerical simulation of the effect of rain on aerodynamic performance and aeroacoustic mechanism of an airfoil via a two phase flow approach, SN Applied Sciences, 2020. 
19. H. Fatahian, H. Salarian*, M. E. Nimvari, J. Khaleghinia, Effect of Gurney flap on flow separation and aerodynamic performance of an airfoil under rain and icing conditions, Acta Mechanica Sinica, 2020.
20. A. Hadidi*, M. E. Nimvari, A geometric mass control approach in level set method to simulate multiphase flows with complex interface topologies, case study: oblique coalescence of gas bubbles in a liquid, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020.
21. H. J. Jouybari*, M. E. Nimvari*, S. Saedodin, Thermal performance evaluation of a nanofluid-based flat-plate solar collector: An experimental study and analytical modeling, Journal of Thermal Analysis and Calorimetry, 2019.
22. H. J. Jouybari, S. Saedodin, A. Zamzamian, M. E. Nimvari*, Analytical investigation of forced convection heat transfer in a flat plate solar collector filled with a porous medium by considering radiation effect, Journal of Porous Media, 2018.
23. S. M. Momeni, G. Salehi, M. E. Nimvari, Modeling and thermoeconomic optimization of marine diesel charge air cooler, Energy, 2018.
24. H. Fatahian, E. Fatahian, M. E. Nimvari*, Improving efficiency of conventional and square cyclones using different configurations of the laminarizer, Powder Technology, 2018.
25. H. Fatahian, H. Salarian*, M. E. Nimvari, E. Fatahian, Numerical study of suction and blowing approaches to control flow over a compressor cascade in turbulent flow regime, International Journal of Automotive and Mechanical Engineering, 2018.
26. H. Fatahian*, H. Salarian, M. E. Nimvari, E. Fatahian, Numerical study of thermal characteristics of fuel oil- alumina and water-alumina nanofluid flow in channel laminar flow, IIUM Engineering Journal, 2018.
27. M. E. Nimvari*, N. F. Jouybari, Q. Esmaili, A new approach to mitigate intense temperature gradients in ceramic foam solar receivers, Renewable Energy, 2018.
28. N. F. Jouybari, M. Maerefat, S. Lundstrom, M. E. Nimvari*, Z. Gholami, A general macroscopic model for turbulent flow in porous media, Transaction of ASME: Journal of Fluid Engineering, 2018.
29. H. J. Jouybari, S. Saedodin*, A. Zamzamian, M. E. Nimvari, S. Wongwises, Performance evaluation of a flat plate solar collector filled with porous metal foam: Experimental and numerical analysis, Energy Conversion and Management, 2017.
30. A. Jamarani, M. Maerefat, N. F. Jouybari, M. E. Nimvari*, Thermal performance evaluation of a double tube heat exchanger partially filled with porous media under turbulent flow regime, Transport in Porous Media, 2017.
31. H. J. Jouybari, S. Saedodin*, A. Zamzamian, M. E. Nimvari, Experimental investigation of thermal performance and entropy generation of a flat plate solar collector filled with porous media, Applied Thermal Engineering, 2017.
32. H. J. Jouybari, S. Saedodin*, A. Zamzamian, M. E. Nimvari, S. Wongwises, Effects of porous material and nano-particles on the thermal performance of a flat plate solar collector: An experimental study, Renewable Energy, 2017. 
33. M. E. Nimvari*, N. F. Jouybari, Investigation of turbulence effects within porous layer on the thermal performance of a partially filled pipe, International Journal of Thermal Sciences, 2017.
34. N. F. Jouybari, S. Lundstrom, G. Hellstrom, M. Maerefat*, M. E. Nimvari, An extended macroscopic turbulence model for flow in porous media, Journal of Porous Media, 2016.
35. N. F. Jouybari, M. Maerefat*, M. E. Nimvari, A pore scale study on turbulent flow with combustion and radiation in porous media, Heat and Mass Transfer, 2016.
36. N. F. Jouybari, M. Maerefat*, M. E. Nimvari, A new turbulence model for reacting flow in porous media, Transport in Porous Media, 2015.
37. M. E. Nimvari, M. Maerefat*, M. K. El-Hossaini, N. F. Jouybari, A study on turbulence effects in cylindrical porous burner, Journal of Porous Media, 2014.
38. N. F. Jouybari, M. Maerefat*, M. E. Nimvari, Pore scale simulation vs volume averaged treatment of turbulent reacting flow in a porous medium, Journal of Porous Media, 2014.
39. M. E. Nimvari, M. Maerefat*, N. F. Jouybari, M. K. El-Hossaini, Numerical simulation of turbulent reacting flow in porous media using two turbulence models, Computers and Fluids, 2013.
40. M. E. Nimvari, M. Maerefat*, M. K. El-Hossaini, Numerical simulation of turbulent flow and heat transfer in a channel partially filled with a porous media, International Journal of Thermal Sciences, 2012.
41. M. R. Ansari*, A. Hadidi, M. E. Nimvari, Effect of a uniform magnetic field on dielectric two-phase bubbly flows using the Level Set method, Journal of Magnetism and Magnetic Materials, 2012.
42. M. R. Ansari*, M. E. Nimvari, Bubble viscosity effect on internal circulation within the bubble rising due to buoyancy using the level set method, Annals of Nuclear Energy, 2011.
43. In Persian journals:
44. H. Gavzan Galogah, M. E. Nimvari*, Q. Esmaili, Simulation of the effect of catalyst layer on the performance of polymer fuel cell using lumped model, Iranian Science of Marine Technology, 2022.
45. M. Hajjari, G. Salehi*, M. E. Nimvari, Computational fluid dynamics simulation of Ljungstrom rotary preheater in steam power plant for leakage assessment using porous media approach, Journal of Solid and Fluid Mechanics, 2021.
46. M Asadi Paein Lamouki, M. E. Nimvari*, Q. Esmaili, Energy and Exergy Analysis of the Ocean Thermal Energy Conversion Combined Cycle Power Plant with a Two-stage Turbine and Using Thermal Power Plant Condenser Output Warm Water, Iranian Science of Marine Technology, 2020.
47. S. M. Momeni, G. Salehi*, M. E. Nimvari, Y A. Chaboki, N. Koosha, Energy and exergy analysis of marine diesel engine power cycle to reduce losses by considering the effect of ambient temperature, Iranian Science of Marine Technology, 2019.
48. Q. Esmaili*, M. E. Nimvari, Modeling of PEM fuel cells performance using lumped method, Modares Mechanical Engineering, 2018.
49. S. Y. Dibazar, G. Salehi*, S. M. H. Sharifi, M. E. Nimvari, Thermo-economic optimization of regenerative organic Rankine cycle for low grade waste heat recovery using genetic algorithm, Modares Mechanical Engineering, 2018.
50. A. Hadidi*, M. E. Nimvari, M. R. Ansari, Simulation of oblique coalescence of a pair of bubbles using level set method, Modares Mechanical Engineering, 2018.
51. S. S. Jalali, G. Salehi*, S. M. H. Sharifi, M. E. Nimvari, Energy, exergy and environmental analysis of using hybrid compression-absorption refrigeration system on a merchant ship, Modares Mechanical Engineering, 2017.
52. A. Jamarani, M. Maerefat*, M. E. Nimvari, Numerical study of heat transfer in double-tube heat exchanger filled with porous material in a turbulent fluid flow, Modares Mechanical Engineering, 2016.
53. A. Jamarani, M. Maerefat*, M. E. Nimvari, Numerical investigation of nanofluid's effect on heat transfer in a pipe filled with porous material in a turbulent fluid flow, Modares Mechanical Engineering, 2016.
54. A. Jamarani, M. Maerefat*, M. E. Nimvari, Introducing a proper definition of the Nusselt number for fluid flow in a pipe partially filled with porous media, Modares Mechanical Engineering, 2015.
55. M. E. Nimvari, M. Maerefat*, M. K. El-Hossaini, N. F. Jouybari , Numerical simulation of combustion inside a cylindrical porous burner including turbulence effects, Modares Mechanical Engineering, 2014.
56. N. F. Jouybari, M. Maerefat*, M. E. Nimvari, Pore scale study on the reacting flow in porous media including flow turbulence, Modares Mechanical Engineering, 2013.
57. M. Maerefat*, M. E. Nimvari, M. K. El-Hossaini, Analytical modeling of different heat transfer mechanisms between flame and dish in a gas stove, Journal of Iranian Society of Mechanical Engineering, 2011.

Research Projects :

- طراحی فن گریز از مرکز فشار بالا

- طراحی مقدماتی سامانه پیشرانش مستقل از هوا

- تحلیل عددی عملکرد پروانه دوبل در رونده زیرسطحی

- بهینه ‏سازی عملکرد سایکلون ها

- امکان ‏سنجی استفاده از سوخت مایع در مشعل متخلخل